Fly Ash Brick Making Hydraulic Press

Send Email /SMS Enquiry

Technical specification
Production Capacity 1000 Bricks per Hour (L - 230 x W-110 x H75mm)
Hydraulic Pressing Capacity 60 Tons
No. of Bricks Produced Per Stroke 4 Nos
Total Cycle 06 Cycles per minute
Hydraulic Pressure 160 kg / cm2
Total Connected Load 27.5 HP
Hydraulic Oil - Grade - Servo - 68 320 Liters
Total Required labors 10 to 12 Nos Approx
Wooden Pallet (Material - Hard Board) Length 600 mm x width 300mm x Thickness - 12mm - Qty. 2500 Nos.
Bricks curing time 10 to 12 Days.
Brick Weight 3Kg Approx.
Recipe Fly Ash: 55% Crush Sand: 38% Cement: 07% Approx
Compressive strength 16N/mm2
Raw material consumption - Per day Fly Ash : 10 Ton / Crush Sand: 7 Ton / Cement: 1.3 Ton Approx
Machine Dimension Length 30 Feet X Width 11 Feet X Height 9 Feet
Shade For Machine Length 60ft X Width - 40ft X Height-20ft (Area- 1800 Sq.ft.)
Total Area 10000 Sq. Ft. minimum
50 Tons Hydraulic Pressing capacity and Auto push out on Pallet
Operation / Control Fully Automatic PLC Base.
Machine Efficiency 85% of mentioned capacity.
Pan Mixer 500kgs. Material Mixing Capacity
Rubber Belt Conveyor 18 Feet Length

Other Products Range

Block Making Vibro Machine Nmi 400 V
Vibro Table
Nilmani Fly Ash Machine